Memory Usage Auditing For .Net Applications

No.of Views1667
Bookmarked0 times
Downloads 
Votes0
By  amalhashim   On  15 Feb 2010 23:02:10
Tag : ADO.NET , How to
Memory Usage Auditing For .Net Applications
emailbookmarkadd comments print

Images in this article missing? We recently lost them in a site migration. We're working to restore these as you read this. Should you need an image in an emergency, please contact us at info@codegain.com

 

Introduction

The .NET runtime supports automatic memory management. It tracks every memory allocation made by the managed program and periodically calls a GC that finds memory that is no longer in use and reuses it for new allocations. An important optimization that the garbage collector performs is that it does not search the whole heap every time, but partitions the heap into three generations (0, 1, and 2).

Generation 0 is the smallest of these, and typically takes only 1/10th of a millisecond to complete but only looks to clean up the allocations that happened after the last GC (and obviously, are not being used). Ideally, the size of a generation is less than the L2 cache size. Generation 1 GCs tackle the allocations that survived one GC; it takes longer to run than Gen 0 GCs, taking about 1 millisecond. Ideally, there should be 10 Gen 0 GCs for every Gen 1 GC.

Gen 2 GCs tackle all objects. Thus, the time taken can be significant. For example, it can take about 160 milliseconds for a 20MB heap, which is a noticeable amount of time. The time grows roughly linearly with the size of the heap (about 8 milliseconds per MB as a very rough estimate). The true cost depends on the amount of memory surviving, the number of GC pointers in surviving memory, and how fragmented the heap is. Ideally, there should be 10 Gen 1 GCs for every Gen 2 GC.

Taken in its entirety, the .NET GC heap looks like a sawtooth with the troughs corresponding to Gen 2 collections, as shown in Figure below. The typical Gen 2 heap-to-trough ratio is about 1.6, with the ratio being largely independent of heap size (with no fragmentation). In the presence of fragmentation, this number can vary significantly.





Task Manager

The first step in reducing the memory consumption of your application is to understand how much of it is currently used. For that you can use the Windows built-in Task Manager application.

Most users are already familiar with task manager. You can invoke it by typing taskmgr in your run command window (Winkey+R), or by pressing Ctrl+Alt+Del and selecting "Start Task Manager". On the "Processes" tab, you will find information on all the system's currently running processes. If the columns don't include PID, Memory-Working Set and Memory-Private Working Set, use the View | Select Columns' menu option to add them to the display.

Shared Versus Unshared Memory

The working set is the physical memory currently being used by the process. However, the operating system performs optimizations to ensure that all memory is not equally expensive. Much of the memory a process uses holds read-only data (for example, the actual instructions to execute). Because this data is read-only it can be shared among all processes that need it. Since all processes make extensive use of shared, read-only operating system code, a substantial amount of every process's working set is shared. Thus, total working set tends to significantly overestimate the true cost of the memory used by a process.

The operating system also keeps track of unshared (Private) memory. This includes all read-write memory used by the process. While private working set underestimates the true cost of memory used by a process (we will see how when we discuss the tool VADump), it tends to be a better metric to optimize, because unlike optimizing shared memory, any gains in private memory will reduce the total memory pressure on the machine.

Finally, both total and private memory counts miss an important memory used by a process: the file system cache. Because hard disk access is so expensive, even when a file's data is not mapped directly into memory, it is cached by the operating system. This memory use increases memory pressure on the system, and is not included in either of the working set metrics (it is owned by the operating system). There is not much that can be done about file access (if your program needs a file, it can't be avoided), so it can be considered a cost that can't be optimized.

Application Size

An application may be categorized as small, medium, or large depending on its memory usage. A small application has a 20MB or smaller working set size with a smaller than 5MB private working set; a medium application has a working set size of approximately 50MB with about 20MB private working set; a large application typically has working set sizes greater than 100MB, with private working set sizes exceeding 50MB. The larger your application, the more valuable optimizing your application's memory usage is likely to be.

A simple and quick way to monitor memory usage and check for leaks is by running a sniff test on your application. Run the application for a while and monitor its working set usage; if the working set grows unbounded, that can mean a memory leak or other issues.

VADump: A More Detailed View

Task Manager provides only a summary of the memory usage of an application. To get more detail you need a tool called VADump (see the Resources sidebar). This is invoked by typing VADump –sop ProcessID in the command prompt under the directory in which VADump is installed. It prints a breakdown of memory within a single process down to DLL level of granularity. A typical dump is shown in Figure Below.



To read the dump, start with grand total working set. This number should agree with the number in Task Manager. This number is then broken down into eight categories. The most interesting of these categories are:

  • Code/Static Data, which represents DLLs that were loaded by the process.
  • Heap, which represents native (not GC) heap memory used.
  • Other Data, which represents memory allocated using the OS VirtualAlloc function. For managed code this is important because it includes the entire garbage-collected heap.


The memory used by DLLs is further broken down by VADump after the summary table. For each DLL, it shows the number of pages (a page is always 4K) that each DLL uses. Thus, one can determine the memory cost of all the code that is loaded.

In Figure above, there is a row labeled "Grand Total Working Set." The total working set in Kilobytes and Pages is in the first column. Columns 2, 3 and 4 (Private Kbytes, Shareable Kbytes and SharedKBytes) add up to the Total Working Set column. It is Column 2, the Private Kbytes value, that is depicted as Private Working Set in TaskManager, whereas Column 1 is shown as Total Working Set in TaskManager. Thus, VADump allows you to see the separation between private and total working sets, including shareable and shared working sets. This is a more complete picture than what is available through TaskManager.

When .NET applications are large, they are typically large either because they run a lot of code or they use a lot of data. In this case, you will see a large number of DLLs loaded and the Code/Static Data contribution tends to dominate the total working set. For managed applications, this data is in the GC heap and thus shows up as Other Data dominating the working set.

In the lower part of Figure 2, you see module working sets (in pages) listed. This tells you which modules contribute to the working set of the application and how much working set each module is consuming. Thus, you can very quickly determine how much working set a particular DLL contributes in terms of the DLL's private, shared, and shareable working set. This view unambiguously shows whether a DLL load can be eliminated and how many bytes of private working set can be shaved off the application's working set.

Once a DLL that may not be pay for play is identified (for example, a DLL may be loaded even if it is not used in a particular execution), the next step is to identify why the particular DLL gets loaded and seek to eliminate an unwanted load. Steps for investigating suspicious DLL loads can be found in the CLR and Framework Perf Blog.

The heap data that is shown by the VADump output is for the unmanaged heap—this is memory that will not be managed by the .NET GC. It is important to keep this number small so the GC can manage most of your memory by cleaning up as necessary.

The Other Data category represents calls to a primitive OS memory allocation function (VirtualAlloc) that VADump cannot categorize in any other way. For .NET applications, typically the most important component of Other Data is the garbage-collected heap that holds all user-defined objects.

Perfmon

VADump gives the first level of breakdown of memory usage in the process. However, it does not precisely tell us how much GC memory we are using (the Other Data category can include memory other than the GC heap), and it does not tell whether we have a healthy ratio of GC generations. For that we need to use the Windows PerfMon application. You can start it by typing PerfMon in the run command window which should bring up the window shown in Figure below. PerfMon is able to gather a wealth of performance data, but here we focus in on its use for monitoring the GC heap.



After PerfMon comes up, we need to configure it to display information about the GC. We do this by first clicking on the Performance Monitor item in the tree control in the left pane. This changes the right pane to display performance counter data. Now click the + sign for adding new counters. Next, select the counters you want to monitor as well as the processes you'd like to watch, as shown in Figure below.



When you select a few counters, you will notice names of all the applications using the runtime. You may select one or two or however many applications you wish to monitor. In addition, there is an instance named All instances which is to enable monitoring data across all instances shown but the data will be displayed separately. In addition, there is a _Global_ instance, which sums up the data from the different instances.

If an application was started after PerfMon was being used to monitor other applications already, one can add more applications by clicking the + sign and adding counters for the new application (only adding the new instance is required; the other instances will continue to display in PerfMon).

Finally, by default the data is shown graphically, but it is more useful to display it numerically. This can be done by clicking on the report-type toolbar below figure.



In one test, it showed us that 7.3MB out of the total 8.6MB of private working set was take up by the GC heap and about 11 percent of time was spent in GC. A healthy number for the time in GC is less than 10 percent of total application time, so this particular application would be on the borderline. Finally, it also tells us the number of Gen0, Gen1 and Gen2 collections. Ideally, we want the number of Gen0 collections to be at least 10 times that of Gen1 collections, and the number of Gen1 collections to be at least 10 times that of Gen2 collections.

Thank you

Amal

 
Sign Up to vote for this article
 
About Author
 
amalhashim
Occupation-Software Engineer
Company-Aditi Technologies
Member Type-Senior
Location-Not Provided
Joined date-07 Jun 2009
Home Page-http://lamahashim.blogspot.com
Blog Page-http://lamahashim.blogspot.com
I have done my masters in Computer Applications and graduation in Computer Science. I have great passion in working with Microsoft tool and technologies. I am also a Microsoft Most Valuable Professional. Personally my objective is to design/develop applications which eases user experience and performs better in long run.
 
 
Other popularSectionarticles
Comments
There is no comments for this articles.
Leave a Reply
Title:
Display Name:
Email:
(not display in page for the security purphase)
Website:
Message:
Please refresh your screen using Ctrl+F5
If you can't read this number refresh your screen
Please input the anti-spam code that you can read in the image.
^ Scroll to Top
</